View HSMF-C165_615289.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Agilent HSMF-C165, C166, C167 Miniature Bi-Color Surface Mount Chip LEDs
Data Sheet
Description The HSMF-C16x series of bicolor chip-type LEDs is designed in an ultra small package for miniaturization. It is the first of its kind to achieve such small packaging for 2 dies.
The small size, narrow footprint, and low profile make this series of LEDs excellent for backlighting, status indication, and front panel illumination applications.
Features * Small 1.6 x 0.8 mm footprint * Diffused optics * Operating temperature range of -30C to +85C * Compatible with reflow soldering * Three color combinations available: red/green, yellow/ green, orange/green * Available in 8 mm tape on 7" (178 mm) diameter reels Applications * Keypad backlighting * Symbol backlighting * LCD backlighting * Status indication * Front panel indicator
Device Selection Guide Part Number HSMF-C165 HSMF-C166 HSMF-C167 Color High Efficiency Red/Green Yellow/Green Orange/Green Parts per Reel 4000 4000 4000
Package Dimensions
CATHODE LINE LED DIES
1
3 0.8 (0.031)
2
4
1.6 (0.063)
GREEN 1 RED/YELLOW/ORANGE 2 4 POLARITY 3
DIFFUSED EPOXY
0.5 (0.020) PC BOARD
CATHODE LINE 0.4 (0.016)
0.16 (0.006) 0.4 (0.016)
0.3 (0.012)
SOLDERING TERMINALS
NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.1 mm ( 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
2
Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current [1] Peak Pulsing Current[2] Power Dissipation Reverse Voltage (IR = 100 A) LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature
Notes: 1. Derate linearly as shown in Figure 4. 2. Pulse condition of 1/10 duty and 0.1 ms width.
HSMF-C165/166/167 20 100 52 5 95 -30 to +85 -40 to +85 See reflow soldering profile (Figure 6)
Units mA mA mW V C C C
Electrical Characteristics at TA = 25C Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 2.1 2.2 2.1 2.2 2.6 2.6 2.6 2.6 Reverse Breakdown VR (Volts) @ IR = 100 A Min. 5 5 5 5 Capacitance C (pF), @ VF = 0, f = 1 MHz Typ. 5 7 6 9 Thermal Resistance RJ-PIN (C/W) Typ. 325 325 325 325
Color HER Orange Yellow Green
Optical Characteristics at TA = 25C Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 2.5 2.5 2.5 4.0 10.0 8.0 8.0 15.0 Peak Wavelength peak (nm) Typ. 630 605 589 570 Color, Dominant Wavelength d[2] (nm) Typ. 626 604 586 572 Viewing Angle 2 1/2 Degrees [3] Typ. 120 120 120 120
Color HER Orange Yellow Green
Notes: 1. The luminous intensity, I V, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d , is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3
Color Bin Limits Green Color Bins[1] Bin ID A B C D E Orange Color Bins [1] Bin ID A B C D E F Dom. Wavelength (nm) Min. Max. 596.0 601.0 599.0 604.0 602.0 607.0 605.0 610.0 608.0 613.0 611.0 616.0 Dom. Wavelength (nm) Min. Max. 561 565 564 568 567 571 570 574 573 577
Yellow/Amber Color Bins[1] Dom. Wavelength (nm) Bin ID Min. Max. A 581.5 585.0 B 584.0 587.5 C 586.5 590.0 D 589.5 592.5 E 591.5 595.0 F 594.0 597.5 Light Intensity (Iv) Bin Limits[1] Intensity (mcd) Bin ID Min. Max. A 0.10 0.20 B 0.16 0.32 C 0.25 0.50 D 0.40 0.80 E 0.63 1.25 F 1.00 2.00 G 1.60 3.20 H 2.50 5.00 J 4.00 8.00
Bin ID K L M N P Q R S T
Intensity (mcd) Min. Max. 6.30 12.50 10.00 20.00 16.00 32.00 25.00 50.00 40.00 80.00 63.00 125.00 100.00 200.00 160.00 320.00 250.00 500.00
Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 4
1.0 GREEN
RELATIVE INTENSITY
IF - FORWARD CURRENT - mA
100
HER 10 ORANGE YELLOW 1 GREEN
YELLOW 0.5 ORANGE HER
0 500
550
600
650
700
750
0 1.5 1.6 1.7 1.8 1.9
2
2.1 2.2 2.3
WAVELENGTH - nm
VF - FORWARD VOLTAGE - V
Figure 1. Relative intensity vs. wavelength.
Figure 2. Forward current vs. forward voltage.
IF MAX - MAXIMUM FORWARD CURRENT - mA
1.4 1.2
LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
25
20 R J-A= 600C/W R J-A= 800C/W 10
1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30
15
5
0
0
20
40
60
80
100
IF - FORWARD CURRENT - mA
TA - AMBIENT TEMPERATURE - C
Figure 3. Luminous intensity vs. forward current.
Figure 4. Maximum forward current vs. ambient temperature.
100 90
RELATIVE INTENSITY - %
80 70 60 50 40 30 20 10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90
ANGLE
Figure 5. Relative intensity vs. angle.
5
0.60 (0.024)
10 SEC. MAX.
TEMPERATURE
230C MAX. 140-160C 4C/SEC. MAX. OVER 2 MIN. TIME 4C/SEC. MAX. -3C/SEC. MAX.
0.40 (0.016) 0.30 (0.012) 0.40 (0.016)
0.70 (0.028)
0.70 (0.028)
Figure 6. Recommended reflow soldering profile.
Figure 7. Recommended soldering pad pattern.
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 8. Reeling orientation.
8.0 1.0 (0.315 0.039) 10.50 1.0 (0.413 0.039) O 20.20 MIN. (O 0.795 MIN.)
O 13.1 0.5 (O 0.516 0.020) 3.0 0.5 (0.118 0.020)
178.40 1.00 (7.024 0.039)
59.60 1.00 (2.346 0.039)
4.0 0.5 (0.157 0.020)
6 PS
5.0 0.5 (0.197 0.020)
Figure 9. Reel dimensions.
NOTE: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
6
4.00 (0.157) 1.50 (0.059)
CATHODE
DIM. C (SEE TABLE 1) 0.20 0.05 (0.008 0.002)
1.75 (0.069)
3.50 0.05 (0.138 0.002) DIM. A (SEE TABLE 1) 8.00 0.30 (0.315 0.012)
DIM. B (SEE TABLE 1) 2.00 0.05 (0.079 0.002) 4.00 (0.157)
CARRIER TAPE USER FEED DIRECTION COVER TAPE
TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER HSMF-C16x SERIES DIM. A DIM. B DIM. C 0.10 ( 0.004) 0.10 ( 0.004) 0.10 ( 0.004) 1.80 (0.071) 0.95 (0.037) 0.60 (0.024)
Figure 10. Tape dimensions.
END
START
THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
MOUNTED WITH COMPONENTS
THERE SHALL BE A MINIMUM OF 160 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
MINIMUM OF 230 mm (9.05 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE.
Figure 11. Tape leader and trailer dimensions.
NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. TOLERANCE IS 0.1 mm ( 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
7
Reflow Soldering For more information on reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components. Storage Condition: 5 to 30C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been open for more than 1 week Baking recommended condition: 60 5C for 20 hours.
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright (c) 2002 Agilent Technologies, Inc. Obsoletes 5988-4258EN April 6, 2002 5988-6146EN

▲Up To Search▲

Price & Availability of HSMF-C165

	To Download HSMF-C165 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .